LG-Nortel IP LDK-20 Programming Manual Download

Page: 142 / 581

IP LDK-20 Programming Manual System Feature

126

the next Secretary.

6. If an Executive has multiple secretaries, a secretary can forward a call to another secretary. But,

secretary cannot forward a call to Executive.

7. If an Executive makes a call forward to non-secretary station, a call to Executive will be routed to

assigned station(see Ref.4).

8. When both Executive and Secretary are busy, camp-on / transferred calls / messages is remained

at the last Secretary station in the chain.

Reference

1.  DND : 2.4.9
2.  Camp-On : 2.4.5
3.  Call transfer : 2.3.2
4.  Call forward : 2.3.1

Admin Programming

Do Not Disturb

4.1.2.3 (PGM 111 – FLEX 3)

Executive/Secretary Transfer

4.10.3 (PGM 229)

Summary of Contents for IP LDK-20






































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands

LG-Nortel IP LDK-20, Programming Manual

Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands