LG-Nortel IP LDK-20 Programming Manual Download Page 23

Page: 23 / 581

IP LDK-20 Programming Manual Abbreviation and Keywords Table

STA

Station

An extension (terminal) of IP LDK.

Station

An extension (terminal) of IP LDK.

Station Speed Dial

The speed dial data that is saved by each station.

Sub-address

ISDN supplementary service.

System Attendant

The first programmed attendant among the main attendant.

System Speed Dial

The speed dial data that is saved by attendant station.

TEL

Telephone

The Abbreviated presentation of 'telephone'.

Terminal Group

The call distribution method of hunt group.

Tone ring

UCD (Group)

Uniform Call Distribution

The call distribution method of hunt group.

UNA

Universal Night Answer

The software service that allows the pickup by any station at night mode.

Unsupervised Conference

The supervisor omitted conference communication.

VM or VM Group or Voice Mail Group

Voice Mail Group

The hunt group that the call is distributed to voice mail device.

VMIB

Voice Mail Interface Board

IP LDK hardware board to serve the voice mail service.

VOIB ( VOIM in IP LDK-20)

Voice Over IP Interface Board

IP LDK hardware board to serve the voice over IP.

Weekly Time Table

The table that is saved the day working time and work finish time during week.

WHTU

Wireless Hand Telephone Unit

Wireless DECT telephone terminal.

Wrap Up Timer

The guarantee timer that remains the station status busy.

Summary of Contents for IP LDK-20






































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands

LG-Nortel IP LDK-20, Programming Manual

Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands