LG-Nortel IP LDK-20, Programming Manual

Page: 39 / 581

IP LDK-20 Programming Manual System Feature
23
To access a CO Line from a SLT,
1. Lift the handset.
2. Dial the individual CO Line, CO group access code, or the first CO Line access code from the
accessible group.
To access a CO Line Group,
1. The number of CO Group in IP LDK-20 is 8.
2. You can access a CO Group by dialing 8, 8 and the CO Group number(see Ref.1)
Condition
1. A DKTU should have an idle appearance (CO Line/Pool button/Loop button) to access an
outgoing CO Line/incoming CO Line.
2. To assign the {LOOP} button.
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + 8 4 + [HOLD/SAVE]
3. When the Override 1st CO Line Group is enabled, the system will search for the next accessible
CO group until a CO Line is available if there is no available CO Line by dialing CO Line group
access code (‘
9 ’ or ‘ 0 ’)
4. A station which is not permitted to access a CO Line will hear error while trying to access a CO
Line, but the station can receive a transferred CO Line call.
5. The CO Line choice (Round-robin or Last Choice) is determined by Admin Programming (ADMIN
160-FLEX 3)
6. If the CO Line is BRI, when a user tries to seize B1 but the network requests to serve B2, the
system can change CO Line to B2. (There is a {B2 CO} button or {LOOP} button)
7. Unused CO Lines should be assigned to unused CO group 9 to prevent to be accessed by a
station.
8. The first CO Line group (00) is directed line group and it can be used with {CO Line} button
(Private Line)
Reference
1. Access CO in 1st CO Group Code : 3.6.7 (PGM 107 – FLEX 12)
2. Access Individual CO Code : 3.6.7 (PGM 107 – FLEX 8)
3. Access CO Group Code : 3.6.7 (PGM 107 – FLEX 7)
4. CO Group Access : 4.1.8
Admin Programming
n
CO Line Choice 4.4.1.3 (PGM 160 – FLEX 3)
n
Inter-digit Timer 4.5.2.8 (PGM 181 – FLEX 8)
n
CO Line Group Access 4.1.8 (PGM 117)
n
CO Line Group 4.2.2.1 (PGM 141 – FLEX 1)
n
Override 1st CO Line Group 4.4.2.3 (PGM 161 – FLEX 3)