LG-Nortel IP LDK-20, Programming Manual

Page: 43 / 581

IP LDK-20 Programming Manual System Feature
27
2.2.6 Hot Line & Warm Line
Description
A station user can make an outgoing call by only going off-hook, if the user has previously stored the
destination.
The following figure 2.2.2 describes Hot Line / Warm Line operation. The destination can be CO Line
/ CO Line Group, the function which is set at Flexible button, or another station.
Hot Line can be activated immediately upon an off-hook, Warm Line can be activated after Warm
Line Timer expired. If the user dial other number within Warm Line Time, the call activates as normal
call, not as Warm Line call.
Figure 2.2.6 Hot Line & Warm Line
Operation
To activate Hot Line,
1. Lift the handset at a station, which is assigned to Hot Line.
2. The assigned hot line feature is activated immediately.
To activate Warm Line,
1. Lift the handset at a station, which is assigned to Warm Line.
2. If no dialing for assigned warm line timer, the assigned warm line feature is activated.
Condition
1. A station can be assigned to Hot line or Warm line by Admin Programming (ADMIN 113-FLEX 7).
2. If there is no flexible button in a station, the number is operated as speed dial number.
3. The setting value of Warm Line timer should be less than that of Dial Tone timer.
4. A flexible button may be assigned as {Idle Line Selection} button. When lifting handset or
pressing the [MON] button, the system will be activated as a predefined button is pressed.
5. It is possible to activate in SLT station.
Admin Programming
n
Warm Line Timer 4.5.3.8 (PGM 182 – FLEX 8)
n
Warm Line 4.1.4.7 (PGM 113 – FLEX 7)
n
Idle Line Selection 4.1.13 (PGM 122)
Off-hook
Immediately
Flexible
Button
CO Line or
CO Group
[Hot Line] [Warm Line]
Enter Dial
Flexible
Button
CO Line or
CO Group
Off-hook
ICM Dial Tone
No Digit
(Warm Line Time)
Station
Normal Call
Station