LG-Nortel IP LDK-20 Programming Manual Download Page 79 | Manualshive

Page: 79 / 581

background image

IP LDK-20 Programming Manual System Feature

63

2.4.3 Automatic Privacy

Description

By default, all conversation which take place on CO lines, intercom, and conference are protected by
privacy(Automatic privacy)
Automatic  privacy  allows  a  station  user  to  suspend  automatic  privacy  for  an  existing  CO  line
conversation without invitation.
ADMIN programming(ADMIN program 161 – FLEX 5) is required to enable or disable this feature.

If  automatic  privacy  is  set  “enable”  by  ADMIN  programming  and  press  a  busy  CO  line  button,  busy
tone will be heard.
If  automatic  privacy  is  set  “disabled”  by  ADMIN  programming  and  press  a  busy  CO  line  button,  the
station is connected to the conversation.

Condition

1. A station cannot override the other station during a conference though the privacy of conference

station is disabled.

2.

While Automatic Privacy is disabled, privacy is still assured for intercom and conference calls.

3.

A station can only override privacy-disabled station.

4.

the station is heard Intrusion tone when another station accesses the line.

Admin Programming

n

Auto Privacy

4.4.2.5 (PGM 161 – FLEX 5)

n

Privacy Warning Tone

4.4.2.6 (PGM 161 – FLEX 6)

n

Override Privilege

4.1.4.4 (PGM 113 – FLEX 4)

«
...
77
78
79
80
81
...
»

Summary of Contents for IP LDK-20






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IP LDK-20

Brand: Panasonic Pages: 290

Brand: call4tel Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands