LG-Nortel IP LDK-20, Programming Manual

Page: 258 / 581

IP LDK-20 Programming Manual System Basic ADMIN programming
242
3.6.6 FLEXIBLE NUMBERING PLAN – Station Number (PGM 105)
PROCEDURE
+ 105 + Enter Station Range +
LCD
000 001 002 003
100 101 102 103
(1) [TRANS/PGM] + 105.
000 001 002 003
100 101 102 103
l
Station Number Assign. You will see the 4 station numbers
corresponding to the 4 port numbers. Station number length is
in the range of 2 digits through 4 digits. There are two
methods for changing station number.
Dial two station numbers - Range start station number & range
end station number, then LCD shows dialed range value. Press
the [HOLD/SAVE] button, then station numbers changed from the
first station number on current LCD to range end (All LEDs of
FELX buttons are off)
Press one of FLEX 1-4 (Each FLEX 1-4 is assigned to station
number 1- 4 on the current LCD), then LED of pressed Flex
button is steady on. Dial new station number and press the
[HOLD/SAVE] button, or press other Flex button to assign station
number to other station without saving (The LED of pressed Flex.
button is on)
If you want to delete all station numbers, press the [SPEED]
button and press [HOLD/SAVE] button, then all station numbers
are cleared.
If you want to change next 4 station numbers then press [
▼
]
button. If you want to change previous 4 station numbers, then
press [
▲
] button.
000 001 002 003
100 400 102 103
(2) Press the [HOLD/SAVE] button for saving database permanently.
(Ex: Press FLEX 2, dial 400 and press [HOLD/SAVE] button)
(PGM NUMBER)
Dial two station numbers
- Range start station number
& range end station number