IP LDK-20 Programming Manual ADMIN Programming
302
4.2.4.5 DID Remove Number
Description
If this value is not 0, and the CO Line is DID Line, the system discard the incoming DID digits up to
amount of this value .
e.g. If this value is set to 02 and the outside caller dialed ‘01245’, then the first ‘01’ is removed.
Value : 00~99
PROCEDURE
+ 143 + CO LINE RANGE + + 02(Remove Number) +
4.2.4.6 ISDN Enblock Send
Description
If this value is set to ON, Enblock Sending Mode is applied at outgoing CO call.
Value : ON=1 / OFF=0
- ON: Enblock Sending Mode
- OFF: Overlap Sending Mode
PROCEDURE
+ 143 + CO LINE RANGE + + 1(On) +
4.2.4.7 CLI Transit
Description
When using networking, If this value is set to
ORI
, the originate caller’s CLI is sent for CLI. Otherwise,
the call forwarded station’s CLI is sent.
Value : ORI=1 / CFW=0
-
ORI: Send CLI as the originate caller’s CLI
- CFW: Send CLI as the call forwarded station’s CLI
PROCEDURE
+ 143 + CO LINE RANGE + + 1(ORI) +
Reference
1. Transit – In : 2.16.12
2. CO Transit – Out : 2.16.13
Summary of Contents for IP LDK-20
