LG-Nortel IP LDK-20 Programming Manual Download Page 81 | Manualshive

Page: 81 / 581

background image

IP LDK-20 Programming Manual System Feature

65

2.4.5 Camp-on

Description

When a user calls a busy station, busy tone is heard and the user can give a signal to the busy station.
The busy station (off-hook or on speakerphone) is notified of the call waiting by a camp-on tone and
flashing LED of the

[HOLD/SAVE]

button.

A user of SLT(single line telephone) may notify a busy station that an outside CO call or internal call is
waiting. The busy station is notified of the call by a camp-on tone.

Operation

To activate Call Wait while receiving intercom busy tone,

Dial

•

or the last digit of the busy station or press the busy DSS flexible button, or flexible button

assigned as

{Camp-On}

To answer a Call Wait while receiving intercom busy tone,

Press the

[HOLD/SAVE]

button, the active CO line is placed on exclusive hold and the call waiting is

connected. By pressing

[HOLD/SAVE]

button, you can talk two parties in turns.

Ø

In case of SLT

To activate Call Waiting while receiving intercom busy tone,

1.    Off-hook and dial * or the last digit of the dialed station number.
2.    Await answer to announce the call.
3.    Or, replace the handset and go on-hook.

To answer the call waiting/camp-on,

1. A SLT station is busy and camp-on tone is heard.
2. Make hook-flash and dial

5 6 0

(System Hold Code : see Ref.1)

3. Then the SLT station is connected to the station which made call waiting/camp-on.
4. Make hook-flash and dial

5 6 0

again, then the station is connected to the original station.

Condition

1. To assign the

{Camp-On}

button at a flexible button,

[TRANS/PGM] + Flex. FLEX(to be assigned) + [TRANS/ PGM] + 8 5 + [HOLD/SAVE]

2.  During a conference or paging, Call Waiting is not activated.(see Ref 2, Ref 3)
3.  Camp-on is not applied to a station which is in DND.(see Ref.4)
4.  The attendant can override a station using Camp-on feature.(see Ref.5)

5.

If the ‘Stop Camp-on Tone’(ADMIN program 112 – FLEX 15) is set to ‘ENABLE’, the camp-on

tone will not be heard.

Reference

1.    System Hold Code : 3.6.7(ADMIN 106 – FLEX 17)
2.    Conference : 2.7
3.    Paging : 2.8
4.    DND : 2.4.9
5.    Attendant Override : 2.13.5

Admin Programming

n

Stop Camp-on Tone

4.1.3.15 (PGM 112 – FLEX 15)

n

Voice Over

4.1.4.6 (PGM 113 – FLEX 6) :

Voice over is also applied to SLT.

«
...
79
80
81
82
83
...
»

Summary of Contents for IP LDK-20






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IP LDK-20

Brand: Nortel Pages: 40

Brand: CommTech Pages: 15

Brand: Panasonic Pages: 468

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands