IP LDK-20 Programming Manual System Feature
88
2.4.23 Station Relocation
Description
The Station Relocation Feature lets a user unplug their station and plug it into another location. Dialing
a code followed by the old station number brings all the station attributes including station number,
button mapping, speed dial, and class of service(see Ref.3) to the new location.
Operation
To store the station attributes to a temporary buffer,
1. Dial the feature code
[TRANS] * 1
(Station Relocation Backup)
2. Unplug the station.
To retrieve stored station attributes,
1. Plugging it at another properly wired jack, dial
[TRANS] * 2
.(Station Relocation Retrieve)
2. The station will be relocated. Then, the all station attributes are copied to the current station.
Condition
1. All information for the port of destination station will be retained so that it may be copied or
relocated to another port.
2. It is possible for the same station type.
3. If a different station type is plugged, preprogrammed
{DSS}
buttons are not guaranteed.
4. DKTUs must be relocated to another digital port, DKTUs cannot be relocated to an SLT port.
Reference
1. Class of Service : 2.5.4
Summary of Contents for IP LDK-20
