LG-Nortel IP LDK-20 Programming Manual Download Page 68 | Manualshive

Page: 68 / 581

background image

IP LDK-20 Programming Manual System Feature

52

3. Dial the station number to receive the transfer.
4. Replace the handset or go on-hook.

To make a screened transfer by DKTU,

1. Press the

[TRANS/PGM]

button.

2. Intercom dial tone is heard and the previous call is placed on exclusive hold.
3. Dial the station number to receive the transfer.
4. When the station answers, announce transfer.
5. Replace the handset or go on-hook.

To transfer to a busy station

,

1. Press the

[TRANS/PGM]

button.

2. The CO Line is automatically placed on exclusive hold and ICM busy tone is heard.
3. The transferred station will receive muted transferred CO Line ring.

4. If the call is not answered within Transfer Recall time, the CO Line will be recalled to the

transferring station and the attendant will receive recall ring if the call remains unanswered.

To make an unscreened transfer by SLT

1.    Press and release the hook-switch and intercom dial tone is heard.
2.    The CO Line is placed on exclusive hold and the Transfer Recall timer is activated.
3.    Dial the station number to be transferred.
4.    Replace the handset and go on-hook.

To make a screened transfer by SLT

1.    Press and release the hook-switch and intercom dial tone is heard.
2.    The CO Line is placed on exclusive hold and the Recall timer is activated.
3.    Dial the station number to be transferred.
4.    When the station answers, announce transfer.
5.    Replace the handset and go on-hook.

Condition

1. When the attendant has a DSS and a station of programmed in DSS receives transferred call, the

LED of DSS button in attendant will flashing.

2. When the SLT user is in the screened transfer mode and tries to converse both transferred

station and CO Line, the user can activate brokers call with hook-flash.

3. It is impossible to transfer a call to another busy SLT from a SLT. When receiving busy tone, SLT

user can be connected to the CO Line with hook-flash.

Admin Programming

n

Transfer Recall Timer

4.5.1.7 (PGM 180 – FLEX 7)

n

I-Hold Recall Timer

4.5.1.5 (PGM 180 – FLEX 5)

n

Attendant Recall Timer

4.5.1.1 (PGM 180 – FLEX 1)

n

No Touch Answer

4.1.2.7 (PGM 111 – FLEX 7)

«
...
66
67
68
69
70
...
»

Summary of Contents for IP LDK-20






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IP LDK-20

Brand: Well Pages: 8

Brand: Well Pages: 13

Brand: WS824 Pages: 72

Brand: IPitomy Pages: 124

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands