LG-Nortel IP LDK-20, Programming Manual

Page: 438 / 581

IP LDK-20 Programming Manual ADMIN Programming
422
4.8.2 LEADING DIGIT TABLE (PGM 221)
LDT(Leading Digit Table) is used to check whether digits that is dialed by user is LCR Code or not.
If digits that is dialed by user are equal to LCR Code(ADMIN program 221 – FLEX 2), the digits is
converted and CO line is seized according to DMT(ADMIN program 222).
In IP LDK system, maximum 250 LDT entry can be programmed. Each LDT entry has six sub-
attributes, ‘LCR type’, ‘LCR code’, ‘DMT index for day zone 1/2/3’, and ‘Check password’.
FLEX Item Default Remark(Value)
FLEX 1 FLEX 2 LCR Type BOTH BOTH : Look up this entry for both ‘INT’ and
‘COL’
INT : Look up this entry for internal dialing.
COL : Look up this entry after dialing 3-way
toggle.
FLEX 2 FLEX 3 LCR Code(Up to 12 digits) None To be compared with the dialed digits by a user.
FLEX 3 FLEX 4 DMT index for Day Zone 1
FLEX 4 FLEX 5 DMT index for DAY Zone 2
FLEX 5 FLEX 6 DMT index for Day Zone 3
None
(6 digits)
Meaning of 6 digits : each pair(2 digits) is the
index to the DMT for the each time Zone
1/2/3.(The
[SPEED] button is used to validate the
remaining index)
4.8.2.1 LCR Type
Description
This value is used to select the LCR type.
Value1 : 000~249(LDT Table)
Value2 : INT=1 / COL=2 / BOTH=3
- 1 : INT (look up this entry only for internal dialing)
- 2 : COL (look up this entry only after dialing CO Access Code)
- 3 : BOTH (look up this entry for both INT and COL)
PROCEDURE
+ 221 + Value1 + + Value2(LCR Type) +