Lenovo x3650 M5 Installation And Service Manual Download Page 466

Page: 466 / 1340

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0490

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and

rear of the server), that the air baffle is in place and correctly installed, and that the server cover
is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

Replace power supply.

•

80010701-0707ffff : Numeric sensor [NumericSensorElementName] going high (upper non-critical)

has asserted. (Rear BP1 Temp)

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has asserted.

May also be shown as 800107010707ffff or 0x800107010707ffff

Severity

Warning

Serviceable

Yes

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0490

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and

rear of the server), that the air baffle is in place and correctly installed, and that the server cover
is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

3. Check fan cable on rear HDD cable is connected correctly.

4. Check the fans on rear HDD cage are functional.

5. Replace rear HDD drive cage.

454

Lenovo System x3650 M5 Installation and Service Guide

Summary of Contents for x3650 M5





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for x3650 M5

Reviews:

Related manuals for x3650 M5

Brands by name

Popular brands

Lenovo x3650 M5, Installation And Service Manual

Search results

Summary of Contents for x3650 M5

Reviews:

Related manuals for x3650 M5

Brands by name

Popular brands