Lenovo x3650 M5 Installation And Service Manual Download Page 276

Page: 276 / 1340

Media cage

LCD system information
display panel

Figure 220. LCD system information display panel removal

9. If you are instructed to return the LCD system information display panel, follow all packaging

instructions, and use any packaging materials for shipping that are supplied to you.

Replacing the LCD system information display panel

Use this information to replace the LCD system information display panel.

Note:

The LCD system information display panel is available on some models.

Replacing the LCD panel assembly on a 3.5-inch model

To install the LCD panel assembly on a 3.5-inch model, complete the following steps.

1. Read the safety information that begins on “Safety” on page v and “Installation guidelines” on page 297.

2. Turn off the server and peripheral devices and disconnect the power cords and all external cables, if

necessary.

3. Remove the top cover (see “Removing the top cover” on page 149).

4. Remove the fan cage assembly “Removing the fan cage assembly” on page 178).

Pull the tab on the LCD retention bracket to the left to disengage the retention bracket.

Rotate the

retention bracket to remove it from the server.

Retention bracket

Figure 221. Retention bracket removal

6. Carefully insert the LCD system information display panel into place.

264

Lenovo System x3650 M5 Installation and Service Guide

Summary of Contents for x3650 M5





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for x3650 M5

Reviews:

Related manuals for x3650 M5

Brands by name

Popular brands

Lenovo x3650 M5, Installation And Service Manual

Search results

Summary of Contents for x3650 M5

Reviews:

Related manuals for x3650 M5

Brands by name

Popular brands