Kentrox RMM-1400, Configuration Manual

Page: 51 / 246

Remote RMM-1400 Version 2.0x Configuration Guide
Configuring Network Setup Parameters: Configuring System Clock Settings
5-9
1. To install a timezone definition file, establish an FTP connection into the system
and upload the definition file from your local workstation. A new directory will be
added under the
config
directory with a single file named
timezones.def
.
2. At the
config clock
prompt, apply the installed timezone definition file:
config clock timezone from-file EST
3. (optional) Verify that the clock parameters have been configured properly:
show clock
The command response appears similar to the following display:
4. Save the configuration.
In this scenario, you will:

Install the timezone definition file
 Apply daylight savings rules from the timezone definition file
(Dub)>show
(Dub) show>clock
Wed Jan 20 11:22:30 EDT 2010
Uptime 4 days, 0:17
The timezone is named EST and has an offset of -05:00 GMT.
Daylight savings time is currently active and is saving 01:00.
These settings were loaded from the timezone definition file.
(Dub) show>