Kentrox RMM-1400, Configuration Manual

Page: 200 / 246

Remote RMM-1400 Version 2.0x Configuration Guide
Using Configuration Wizards: Using the initsetup Wizard
19-4
6. (optional) Enter the desired wireless WAN configuration information when
prompted. This includes the following parameters:

Wireless service provider
 Access point name

PPP authentication method
 Remote server if used as default route.
7. (optional) Enter the desired IP address or
none
for the default route when
prompted.
8. (optional) Enter the desired DHCP server settings when prompted. The following
settings are configurable:

DHCP router IP address
 Subnet mask or mask length

The lowest address to serve
 The number of addresses to serve.
9. (optional) Enter the desired clock settings when prompted. The following settings
are configurable:
 The standard timezone

Daylight savings time
 The current time and date.
10. (optional) Enter the desired NTP settings when prompted. The wizard asks you
for the primary and secondary server IP addresses.
11. (optional) Enter the desired SNMP community string settings when prompted.
The following settings are configurable:

The read-only community string
 The read-write community string

The SNMP version.
12. (optional) Enter the desired SNMP manager information when prompted. The
following settings are configurable:

An IP address
 A community string for traps

An SNMP version.
13. (optional) Enter additional SNMP manager settings if desired.