Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 91 / 454

Configuring Optional Characteristics
In addition to configuring the probe’s type, you can configure the probe characteristics
presented in Table 7 on page 67.
Table 7: Probe Characteristics
Description Characteristic
Time between tests (in seconds) frequency
Hops per path for which statistics are gathered hops-of-statistics-kept
Maximum number of consecutive failures max-response-failure
Number of probes per hop operations-per-hop
Owner of the probe owner
Interface on which the probe expects to receive responses receive-interface
Request’s payload size request-data-size
Maximum number of history samples samples-of-history-kept
User-defined tag tag
Probe timeout (in milliseconds) timeout
A value for the TOS byte tos
frequency
■
Use to set the rate (in seconds) that the RTR probe uses to start a response time
operation.
■
Example
host1(config-rtr)# frequency 90
■
Use the no version to return to the default value, 60 seconds.
■
See frequency
operations-per-hop
■
Use to set the number of RTR probe operations sent to a given hop.
■
You can apply this option only to a pathEcho type.
■
Example
host1(config-rtr)# operations-per-hop 5
Response Time Reporter
■ 67
Chapter 1: Configuring IP