Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 78 / 454

■
Use to specify a router-wide maximum number of buffers that resequencing
queues can contain.
■
Specify a value of zero (0) to turn off the limit.
■
Example
host1(config)# tcp resequence-buffers global-maximum
■
Use the no version to revert the global maximum buffer value to its default, 1000
buffers.
■
See tcp resequence-buffers global-maximum
Limiting Buffers per Virtual Router
The tcp resequence-buffers default-vr-maximum command and tcp
resequence-buffers vr-maximum command enable you to limit the number of
outstanding buffers on existing or newly established virtual routers.
tcp resequence-buffers default-vr-maximum
■
Use to specify the default buffer limit assigned to all virtual routers when the
virtual router is established.
■
Specify a value of zero (0) to turn off the limit assignment.
■
Example
host1(config)# tcp resequence-buffers default-vr-maximum 200
■
Use the no version to revert the virtual router maximum value to its default, 100
buffers.
■
See tcp resequence-buffers default-vr-maximum
tcp resequence-buffers vr-maximum
■
Use to define the maximum number of buffers that the current or specified
virtual router can use.
■
Specify a value of zero (0) to turn off the limit assignment.
■
Example
host1(config)# tcp resequence-buffers vr-maximum
■
Use the no version to revert the virtual router maximum value to its default, 100
buffers.
■
See tcp resequence-buffers vr-maximum
54 ■
IP Routing
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide