Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 176 / 454

Clearing IPv6 Routes
To clear dynamic IPv6 routes from the routing table, use the clear ipv6 routes
command. To clear the routes for a specific IPv6 network, specify the IPv6 prefix.
To clear all dynamic IPv6 routes, using the
* (asterisk) option.
clear ipv6 routes
■
Use to clear IPv6 routes.
■
To clear routes in a specific IPv6 network, specify an IPv6 prefix.
■
To clear all dynamic IPv6 routes, use the * (asterisk) option.
■
Example
host1(config)# clear ipv6 routes *
■
There is no no version.
■
See clear ipv6 routes
Creating Static IPv6 Neighbors
To create static IPv6 neighbors, use the ipv6 neighbor command.
ipv6 neighbor
■
Use to create static IPv6 neighbors.
■
Example
host1(config)# ipv6 neighbor 1::10 fastEthernet 1/0 0002.7dfa.0034
■
Use the no version of this command to delete the neighbor.
■
See ipv6 neighbor
Clearing Dynamic IPv6 Neighbors
To clear dynamic IPv6 neighbors, use the clear ipv6 neighbor command. Using the
include-statics keyword clears both dynamic neighbors and static neighbors. Using
the statics-only keyword clears only IPv6 static neighbors.
clear ipv6 neighbors
■
Use to clear all dynamic IPv6 neighbors.
■
Use the include-statics keyword to clear both dynamic neighbors and static
neighbors. Use the statics-only keyword to clear only IPv6 static neighbors.
■
Example
host1(config)# clear ipv6 neighbors
152 ■
Clearing IPv6 Routes
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide