Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 113 / 454

■
frag req—Number of frames requiring fragmentation
■
frag fails—Number of packets unsuccessfully fragmented
■
IP Statistics Sent:
■
generated—Number of packets generated
■
no routes—Number of packets that could not be routed
■
discards—Number of packets that could not be routed that were
discarded
■
ICMP Statistics Rcvd:
■
errors—Error packets received
■
dst unreach—Packets received with destination unreachable
■
time exceed—Packets received with time-to-live exceeded
■
param probs—Packets received with parameter errors
■
src quench—Source quench packets received
■
redirect—Receive packet redirects
■
echo req—Echo request (ping) packets
■
echo rpy—Echo replies received
■
timestamp req—Requests for a timestamp
■
timestamp rpy—Replies of timestamp requests
■
addr mask req—Mask requests sent
■
addr mask rpy—Mask replies sent
■
ICMP Statistics Sent:
■
errors—Error packets sent
■
dst unreach—Packets sent with destination unreachable
■
time excd—Packets sent with time-to-live exceeded
■
param probs—Packets sent with parameter errors
■
src quench—Source quench packets sent
■
redirect—Send packet redirects
■
timestamp req—Requests for a timestamp
■
timestamp rpy—Replies to timestamp requests
■
addr mask req—Address mask requests
■
addr mask rpy—Address mask replies
Monitoring IP
■ 89
Chapter 1: Configuring IP