Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 89 / 454

■
You can also force transmission of the packets on a specified interface regardless
of what the IP address lookup indicates.
■
Example
host1# traceroute 172.20.13.1 20 timeout 10
■
There is no no version.
■
See traceroute
Response Time Reporter
The Response Time Reporter (RTR) feature enables you to monitor network
performance and resources by measuring response times and the availability of your
network devices.
RTR configuration is associated with a specific virtual router, distinct from any other
virtual router.
Configuration Tasks
To configure RTR:
1.
Configure the probe type—an echo probe or a path echo probe.
2.
(Optional) Configure probe characteristics:
■
frequency
■
hops-of-statistics-kept (path echo)
■
max-response-failure (path echo)
■
operations-per-hop (path echo)
■
owner
■
receive-interface
■
request-data-size
■
samples-of-history-kept
■
tag
■
timeout (echo)
■
tos
NOTE: You cannot set any of these characteristics until you have set the probe type.
The default values of these characteristics depend on the type of the entry.
3.
(Optional) Set reaction conditions.
Response Time Reporter
■ 65
Chapter 1: Configuring IP