Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 132 / 454

10.10.133.17/32 10.6.128.1 1 1 0 unresolved 1 down
11.11.11.11/32 3.3.3.3 0 1 0 unresolved 1 down(lr)
■
See show ip static
show tcp ack-rst-and-syn
Use to display the status of TCP ACK, RST, and SYN protection.
■
■
Example
host1# show tcp ack-rst-and-syn
TCP Ack Rst and Syn Protection is ENABLED
■
See show tcp ack-rst-and-syn
show tcp resequence-buffers
■
Use to display the configuration, current per-VR, and per-router state of the TCP
resequencing buffer management functions.
■
Use the vrfName variable to specify a specific VRF for which you want to view
information.
■
Field descriptions
TCP Resequence Buffer Management Configuration
■
Global Maximum—Number of buffers that can be on the reordering queues
of all connections in all virtual routers
■
Default Per-VR Maximum—Default maximum number of buffers for all
connections in a single VR
■
Default Connection Maximum—Default maximum number of buffers for
each connection in each virtual router
■
This VR Maximum—Maximum number of outstanding resequencing buffers
in the current VR
■
This VR Connection Maximum—Maximum number of outstanding
resequencing buffers on any one connection in this VR
TCP Resequence Buffer Management State
■
Global buffers in use—Total number of outstanding resequencing buffers in
the router
■
High Water—Largest number of outstanding resequencing buffers that
the router has experienced since the last reset
■
VR Buffers in use—Number of outstanding resequencing buffers in the current
virtual router
108 ■
Monitoring IP
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide