Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 102 / 454

rtrIndex operation rtt statusDescription timeStamp
-------- --------- --- ----------------- ---------
1 5476 0 responseReceived 08/30/2000 05:17
1 5477 0 responseReceived 08/30/2000 05:17
1 5478 0 responseReceived 08/30/2000 05:17
1 5479 0 responseReceived 08/30/2000 05:17
1 5480 0 responseReceived 08/30/2000 05:17
PathEcho Entries:
rtrIndex test hop operation rtt statusDescription
---------- ------ ---- --------- ------ -----------------
2 165 3 5 0 responseReceived
2 165 3 1 0 responseReceived
2 165 3 2 0 responseReceived
2 165 3 3 0 responseReceived
2 165 3 4 0 responseReceived
rtrIndex test hop operation timeStamp address
---------- ------ ---- --------- ---------------- --------
2 165 3 5 08/30/2000 20:39 10.5.0.11
2 165 3 1 08/30/2000 20:40 10.5.0.11
2 165 3 2 08/30/2000 20:40 10.5.0.11
2 165 3 3 08/30/2000 20:40 10.5.0.11
2 165 3 4 08/30/2000 20:40 10.5.0.11
■
See show rtr history
show rtr hops
■
Use to display RTR hops information.
■
Field descriptions
■
rtrIndex—Index number of the RTR probe
■
hop—Index number of the hop count
■
address—Address of the router at the hop
■
minRtt—Minimum round-trip time in milliseconds
■
maxRtt—Maximum round-trip time in milliseconds
■
avgRtt—Average round-trip time in milliseconds
■
rttSumSqr—Sum of the square of all round-trip times in milliseconds
■
operationsSent—Number of probe operations sent
■
operationsRcvd—Number of probe operations received
■
lastGoodResponse—Time when last valid probe operation was received
■
Example
host1# show rtr hops
rtrIndex hop address minRtt maxRtt avgRtt rttSumSqr
---------- ---- ----------- ------ ------ ------ --------
78 ■
Response Time Reporter
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide