Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 202 / 454

■
Use to display the current state of the routing table, including routes not used
for forwarding.
■
You can display all routes, a specific route, detailed information about all or a
specific route, or summary counters for the routing table.
■
Field descriptions
■
Prefix—IPv6 address prefix
■
Length—Prefix length
■
Type—Protocol type (possible route types include: Bgp, Connect, Idrp, Igrp,
Invalid, Isis, Ndisc, Ospf, Other, Rip, Static)
■
Dst (or Distance)—Administrative distance for the route
■
Met (or Metric)—Number of hops
■
Intf (or Interface)—Interface type and interface specifier
■
NextHop—The configured next hop address for this interface
■
IfIndex—An autogenerated value for the next hop interface
■
Example 1
host1# show ipv6 route
Prefix/Length Type Dst/Met Intf
-------------------------------- ------- ------- --------------------
1::/16 Connect 0/0 loopback1
5::/64 Connect 0/0 ATM4/0.15
6::/64 Static 1/0 ATM4/0.15
2003::/16 Static 1/0 ATM4/0.15
■
Example 2
host1# show ipv6 route summary
Unicast routes:
8 total routes, 576 bytes in route entries
0 isis routes
0 rip routes
3 static routes
2 connected routes
1 bgp routes
0 ospf routes
2 other internal routes
0 access routes
0 internally created access host routes
Last route added/deleted: 2::4/128 by BGP
At MON FEB 04 2008 14:18:25 UTC
Unicast routes used only for Multicast RPF check:
0 total routes, 0 bytes in route entries
0 isis routes
0 rip routes
0 static routes
0 connected routes
0 bgp routes
0 ospf routes
178 ■
Monitoring IPv6
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide