Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 173 / 454

Limiting Buffers per Virtual Router
The tcp resequence-buffers vr-maximum command and tcp resequence-buffers
default-vr-maximum command allow you to limit the number of outstanding buffers
on existing or newly established virtual routers.
tcp resequence-buffers default-vr-maximum
■
Use to specify the default buffer limit assigned to all virtual routers when the
virtual router is established.
■
Specify a value of zero (0) to turn off the limit assignment.
■
Example
host1(config)# tcp resequence-buffers default-vr-maximum 200
■
Use the no version to revert the virtual router maximum value to its default, 100
buffers.
■
See tcp resequence-buffers default-vr-maximum
tcp resequence-buffers vr-maximum
■
Use to define the maximum number of buffers that the current or specified
virtual router can use.
■
Specify a value of zero (0) to turn off the limit assignment.
■
Example
host1(config)# tcp resequence-buffers vr-maximum
■
Use the no version to revert the virtual router maximum value to its default, 100
buffers.
■
See tcp resequence-buffers vr-maximum
Limiting Buffers per Connection
The tcp resequence-buffers connection-maximum command and tcp
resequence-buffers default-connection-maximum command allow you to limit
the number of outstanding buffers on existing or newly established connections.
tcp resequence-buffers connection-maximum
■
Use to define the maximum number of buffers that connections on the current
or specified virtual router can use.
■
Specify a value of zero (0) to turn off the connection maximum.
■
Example
host1(config)# tcp resequence-buffers connection-maximum 50
■
Use the no version to revert the connection maximum value to its default,
IPv6 TCP Configuration
■ 149
Chapter 2: Configuring IPv6