Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 195 / 454

■
Example 6
host1# show ipv6 interface brief
Interface IPv6-Address Status Protocol Description
----------------- ------------------ ------- -------- ----------------
null0 Unnumbered up up
FastEthernet9/1.5 5:1:1::2/64 up up IPv6 interface in
Virtual Router Hop
5
FastEthernet9/0.6 6:1:1::1/64 up up IPv6 interface in
Virtual Router Hop
6
loopback5 10:1:1:0:290:1aff:fe up up
40:1d44/64
■
See show ipv6 address
■
See show ipv6 interface
show ipv6 forwarding-table slot
■
Use to display details on the forwarding table for a specific line module only
when IPv6 is configured on the router. These details include the memory used
by each virtual router configured on the line module and free memory available
on the module.
■
The Load Errors field records any failed routing table distribution attempt as an
error. Attempts can fail for many reasons during normal operation; a failed
attempt does not necessarily indicate a problem. It is normal to see many Load
Errors per day.
■
If the Status field does not indicate Valid, then the routing table distribution has
failed constantly for that VR. It is normal and appropriate behavior for the Status
field to indicate Valid while the Load Error field increases daily.
■
Field descriptions
■
Free Memory—Amount of routing table memory free on the line module,
in kilobytes
■
Virtual Router—Name of the virtual routers configured on the line module
■
Memory (KB)—Amount of routing table memory consumed by the virtual
router, in kilobytes
■
Load Errors—Count of errors made while loading the routing table on the
line module
■
Status—Whether the routing table for the virtual router is valid
■
Example
host1# show ipv6 forwarding-table slot 9
Free Memory = 32766 KB (99.99%)
Virtual Router Memory(KB) Load Errors Status
-------------------------------- -------------- ------------- --------------
default - - Not Resident
1 2 0 Valid
Monitoring IPv6
■ 171
Chapter 2: Configuring IPv6