Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 130 / 454

application. 2 (SELWRITE) means that more buffer space is available
and the application can queue up more data to be transmitted.
■
Call to soclose()—8-bit value indicating how the call went
■
Call to sendto()—16-bit value indicating the return status
■
Call to write()—16-bit value indicating the return status
■
Call to sendmsg()—16-bit value indicating the return status
■
Call to send()—16-bit value indicating the return status
■
Call to recvfrom()—16-bit value indicating the return status
■
Call to recv()—16-bit value indicating the return status
■
Call to recvmsg()—16-bit value indicating the return status
■
Call to read()—16-bit value indicating the return status
■
Example 1
host1# show ip socket statistics
5 10.13.5.70:23 --> 10.10.132.71:2000
type: 1 (SOCK_STREAM)
opts = 13 SO_DEBUG SO_REUSEADDR SO_KEEPALIVE
so_state = 177 SS_NOFDREF SS_CANTSENDMORE SS_CANTRCVMORE SS_PRIV
18 0.0.0.0:23 --> 0.0.0.0:0
type: 1 (SOCK_STREAM)
opts = 7 SO_DEBUG SO_ACCEPTCONN SO_REUSEADDR
so_state = 128 SS_PRIV
■
Example 2—Additional fields displayed by detailed keyword
host1# show ip socket statistics detailed
18 0.0.0.0:23 --> 0.0.0.0:0
type: 1 (SOCK_STREAM)
opts = 7 SO_DEBUG SO_ACCEPTCONN SO_REUSEADDR
so_state = 128 SS_PRIV
pending xmit byte count = 0 recv count 0
Keep alive idle time = 14400 keep alive poll time = 150
Additional state flags:
so_Bound
so_ListenOk
ss_CalledRsSocreate
so_SendtoCalls = 0
so_SendMsgCalls = 0
so_SendCalls = 0
so_SockWriteCalls = 0
so_SendErrors = 0
so_SentBytes = 0
so_BsdCloseNotClosed = 0
so_RecvBytes = 0
so_RecvErrors = 0
so_RecvFroms = 0
so_Recvs = 0
106 ■
Monitoring IP
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide