Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 196 / 454

■
See show ipv6 forwarding-table slot.
show ipv6 local pool
■
Use to display information on IPv6 local address pools, such as prefix delegation
parameters and attributes that control the assignment of prefixes to requesting
routers.
■
Specify the pool name to limit the display to a specific IPv6 local pool.
■
Specify the statistics keyword to display IPv6 local address pool statistics for
prefix delegation.
■
Use the optional delta keyword with the show ipv6 local pool command to
specify that baseline-relative statistics are to be shown. You must use the baseline
ipv6 local pool command to set a baseline.
■
Field Descriptions
■
IPv6 Local Address Pools:
■
Pool—Names of IPv6 local address pools configured on the virtual router
■
Start—Starting prefix of the range of prefixes configured in a particular
pool
■
End—Ending prefix of the range of prefixes configured in a particular
pool
■
Total—Number of prefixes available for allocation to clients from a
particular pool
■
In Use—Number of prefixes in a pool that are currently used by DHCPv6
clients
■
Pool—Name of the IPv6 local address pool for which prefix delegation details
are displayed
■
Utilization—Percentage of IPv6 prefixes allocated to clients from the local
address pool
■
Start—Starting prefix of the range of prefixes configured in a particular pool
■
End—Ending prefix of the range of prefixes configured in a particular pool
■
Total—Number of prefixes available for allocation to clients from a particular
pool
■
In Use—Number of prefixes in a pool that are currently used by DHCPv6
clients
■
Preferred Lifetime—Amount of time for which the prefix remains preferred
for the requesting router to use
■
Valid Lifetime—Amount of time for which the prefix remains valid for the
requesting router to use
■
Exclude—Prefix length or prefix range excluded from allocation to the
requesting router
172 ■
Monitoring IPv6
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide