Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 124 / 454

■
Protocol/Route type codes—Protocol and route type codes for the table that
follows
■
Prefix—IP address prefix of network destination
■
Length—Network mask length for prefix
■
Next Hop—IP address of the next hop to the route, whether it is a local
interface or another router
■
Dist—Administrative distance for the route; see Table 5 on page 27
■
Met—Number of hops
■
Intf—Interface type and interface specifier
■
Example 1
host1# show ip route
Protocol/Route type codes:
I1- ISIS level 1, I2- ISIS level2,
I- route type intra, IA- route type inter, E- route type external,
i- metric type internal, e- metric type external,
O- OSPF, E1- external type 1, E2- external type2,
N1- NSSA external type1, N2- NSSA external type2
L- MPLS label, V- VR/VRF, *- indirect next-hop
Prefix/Length Type Next Hop Dist/Met Intf
------------- ---- -------- -------- ------
172.16.2.0/24 Bgp 192.168.1.102 20/1 fastEthernet0/0
10.10.0.112/32 Static 192.168.1.1 1/1 fastEthernet0/0
10.1.1.0/24 Connect 10.1.1.1 0/1 atm3/0.100
■
Example 2
host1# show ip route static
Protocol/Route type codes:
I1- ISIS level 1, I2- ISIS level2,
I- route type intra, IA- route type inter, E- route type external,
i- metric type internal, e- metric type external,
O- OSPF, E1- external type 1, E2- external type2,
N1- NSSA external type1, N2- NSSA external type2
L- MPLS label, V- VR/VRF, *- indirect next-hop
Prefix/Length Type Next Hop Dist/Met Intf
------------- ---- -------- -------- --------------
10.10.0.112/32 Static 192.168.1.1 1/1 fastEthernet0/0
■
Example 3
host1# show ip route summary
Unicast routes:
8 total routes, 576 bytes in route entries
0 isis routes
0 rip routes
3 static routes
2 connected routes
1 bgp routes
0 ospf routes
100 ■
Monitoring IP
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide