Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 92 / 454

■
Use the no version to return to the default, 3.
■
See operations-per-hop
owner
■
Use to identify the owner of the probe.
■
If the SNMP agent is the owner of the probe, the owner’s name can begin with
agent .
■
Example
host1(config-rtr)# owner 192.10.27.6 rtc.boston.com 555.1212
■
Use the no version to return to the default, no owner.
■
See owner
request-data-size
■
Use to set the protocol data size, in bytes, in the request packet.
■
Example
host1(config-rtr)# request-data-size 20
■
Use the no version to return to the default value, 1 byte.
■
See request-data-size
tag
■
Use to set an identifier for the probe.
■
Example
host1(config-rtr)# tag westford
■
Use the no version to return to the default, no tag.
■
See tag
timeout
■
Use to set the time (in milliseconds) that the probe waits for a response.
■
You can apply this option only to an echo type.
■
Do not set the value for timeout to more than the value set for frequency. If you
do, the timeout value is ignored.
■
If you set the timeout to 0, no timeout is set.
■
Example
host1(config-rtr)# timeout 3000
■
Use the no version to return to the default value, 5000 milliseconds.
■
See timeout
68 ■
Response Time Reporter
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide