Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 200 / 454

■
Shutdown in overload state—Status of shutdown in an overload state
■
Default local preference—Default value for local preference
■
IGP synchronization—Indicates whether synchronization is enabled or
disabled
■
Default originate—Indicates whether network 0.0.0.0 is redistributed into
BGP
■
Auto summary—Status of autosummary
■
Always compare MED—Status of always compare MED
■
Compare MED within confederation—Status of compare MED within a
confederation
■
Advertise inactive routes—Status of Advertise inactive routes
■
Advertise best external router to internal peers—Status of Advertise best
external router to internal peers
■
Enforce first AS—Status of Enforce first AS
■
Missing MED as worst—Status of Missing MED as worst
■
Route flap dampening—Status of route dampening
■
Log neighbor changes—Status of Log neighbor changes
■
Fast External Fallover—Status of Fast External Fallover
■
Maximum received AS-path length—Maximum AS-path length received
■
BGP administrative distances—External, internal, and local BGP
administrative distances
■
Client-to-client reflection—Whether client-to-client reflection is configured
■
Cluster ID—Cluster IDs
■
Route-target filter—Status of Route-target filter
■
Default IPv4-unicast—Status of Default IPv4-unicast
■
Local-RIB version—RIB version
■
Local-FIB version—FIB version
■
Neighbor(s)—BGP neighbors (if configured)
■
Networks for which routing is occurring
■
Aggregate Generation for Unicast Routes
■
Example 1
host1# show ipv6 protocols
Routing Protocol is “ bgp 100"
176 ■
Monitoring IPv6
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide