Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 178 / 454

■
Use to set a statistical baseline for a specified IPv6 interface.
■
Example
host1# baseline ipv6 interface atm 2/0.100
■
There is no no version.
■
See baseline ipv6 interface
baseline ipv6 local pool
■
Use to set a baseline for IPv6 local address pool statistics used in DHCP prefix
delegation.
■
The router implements the baseline by reading and storing the statistics at the
time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved.
■
Example
host1# baseline ipv6 local pool
■
There is no no version.
■
See baseline ipv6 local pool.
baseline tcp
■
Use to set a statistics baseline for all (both IPv4 and IPv6) TCP statistics or for
only IPv4 or IPv6 statistics.
■
The router implements the baseline by reading and storing the statistics at the
time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved.
■
Use the ipv6 keyword to implement a baseline for only IPv6 statistics.
■
Use the delta keyword with IP show commands to specify that baselined statistics
are to be shown.
■
Example 1
host1# baseline tcp
■
Example 2
host1# baseline ipv6 tcp
■
There is no no version.
■
See baseline tcp
154 ■
Monitoring IPv6
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide