Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 145 / 454

■
addr mask req—Number of address mask requests sent
■
addr mask rpy—Number of replies to address mask requests
■
UDP Statistics Rcvd:
■
total—Total number of UDP packets received
■
checksum—Number of checksum error packets received
■
no port—Number of packets received for which no E Series router
application listener was listening on the destination port
■
UDP Statistics Sent:
■
total—Total number of UDP packets sent
■
errors—Number of error packets sent
■
TCP Global Statistics Connections:
■
attempted—Number of outgoing TCP connections attempted
■
accepted—Number of incoming TCP connections accepted
■
established—Number of TCP connections established
■
dropped—Number of TCP connections dropped
■
closed—Number of TCP connections closed
■
currently established—Number of TCP connections currently established
■
TCP Global Statistics Rcvd:
■
total pkts—Total number of TCP packets received
■
in-sequence pkts—Number of packets received in sequence
■
bytes—Number of bytes received
■
chksum err pkts—Number of checksum error packets received
■
authentication err pkts—Number of authentication error packets received
■
bad offset pkts—Number of packets received with bad offsets
■
short pkts—Number of short packets received
■
duplicate pkts—Number of duplicate packets received
■
out of order pkts—Number of packets received out of order
■
TCP Global Statistics Sent:
■
total pkts—Total number of TCP packets sent
■
data pkts—Number of data packets sent
■
bytes—Number of bytes sent
Monitoring IP
■ 121
Chapter 1: Configuring IP