Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 112 / 454

host1# show ip forwarding-table slot 9
Free Memory = 3,166KB
Virtual Router Memory Load Errors Status
(KB)
---------------- --------- ------------- --------
vr1 4128 0 Valid
vr2 3136 0 Valid
vr3 2256 0 Valid
default 1024 0 Valid
-----------------------------------------------------------
■
See show ip forwarding-table slot
show ip interface
■
Use to display the current state of all IP interfaces or the IP interfaces you specify.
■
The default is all interface types and all interfaces.
■
The show-virtual-router-keyword displays virtual router information.
■
Field descriptions
■
interface—Interface type and interface specifier
■
interface status—Status of the interface
■
HTTP Redirect Url—Url to which a subscriber’s initial web browser session
is redirected
■
line protocol—Status of the line protocol
■
Description—Text description or alias if configured for the interface
■
Link up/down trap—Status of SNMP link up/down traps on the interface
■
Internet address—IP address of the interface
■
IP Statistics Rcvd:
■
local destination—Frames with this router as their destinations
■
hdr errors—Number of packets containing header errors
■
addr errors—Number of packets containing addressing errors
■
unkn proto—Number of packets received containing unknown protocols
■
discards—Number of discarded packets
■
IP Statistics Frags:
■
reasm ok—Number of reassembled packets
■
reasm req—Number of requests for reassembly
■
reasm fails—Number of reassembly failures
■
frag ok—Number of packets fragmented successfully
88 ■
Monitoring IP
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide