You can set a statistics baseline for RIP interfaces by using the
baseline ip rip
command.
You can specify a VRF instance for the
show ip rip
commands. You can use the
output filtering feature of the
show
command to include or exclude lines of output
based on a text string you specify. See
JUNOSe System Basics Configuration Guide
,
for details.
baseline ip rip
■
Use to set a statistics baseline for RIP interfaces.
■
The router implements the baseline by reading and storing the statistics at the
time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved.
■
Use the optional
delta
keyword with the
show ip rip statistics
command to
specify that baselined statistics are to be shown.
■
Example
host1#
baseline ip rip
■
There is no
no
version.
■
See baseline ip rip
show ip rip
■
Use to display RIP information.
■
Specify
vrf
vrfName
to limit the display to a specific VRF.
■
Use the
ifconfig
keyword to display address and interface configuration
information instead of the default operational data.
■
Field descriptions
■
Router Information Protocol Fields
■
Router Administrative State—Displays the RIP state. Enable means the
router is allowed to send and receive updates. Disable means that RIP
might be configured but it is not allowed to run yet.
■
System version RIP1—RIP versions allowed for sending and receiving
RIP updates. The router version is currently set to RIP1, which sends
RIPv1 but will receive RIPv1 or RIPv2. If it is set to RIP2, it will send and
receive RIPv2 only. The default is configured for RIP1.
■
Incoming filters—Access list applied to incoming route updates
■
Outgoing filters—Access list applied to outgoing route updates
■
Global route map—Route map that specifies all RIP interfaces on the
router
■
Default metric—Value for redistributed routes. The default is 1. This
global value is superseded by metrics applied to a RIP interface.
Monitoring RIP
■
231
Chapter 4: Configuring RIP
Summary of Contents for IGP - CONFIGURATION GUIDE V11.1.X
