Juniper IGP - CONFIGURATION GUIDE V11.1.X, Configuration Manual

Page: 414 / 454

■
Example
host1:abc# show hosts
Static Host Table
-----------------
name ip address type username password
---- ---------- ---- --------- --------
jkk 10.10.0.73 ftp anonymous null
Clns Host Alias Table
---------------------
name area address system ID type
----- -------------------------------- ----------------- ------
fred 47.0005.80FF.F800.0000.0001.0001 0000.0000.0011.00 static
karen 47.0005.80FF.F800.0000.0001.0001 0000.0000.0012.00 static
■
See show hosts
show isis database
■
Use to display IS-IS link-state database information.
■
Request specific show isis database statistics by selecting from these options:
■
lspid —Link-state protocol ID in form xxxx.xxxx.xxxx.yy-zz
■
hostname —Link-state database information for the specified hostname
■
detail —Detailed link-state database information; if this option is not specified,
a summary display is provided
■
l1 —Level 1 routing link-state database
■
l2 —Level 2 routing link-state database
■
level-1 —Level 1 routing link-state database
■
level-2 —Level 2 routing link-state database
■
Each option can be entered in an arbitrary string within a single command entry.
■
Field descriptions
■
LSPID—LSP identifier
■
LSP Seq Num—Sequence number for the LSP. Enables other routers to
determine if they have received the latest information from source.
■
LSP Checksum—Checksum of the LSP packet
■
LSP Holdtime—Number of seconds that the LSP remains valid
■
ATT—Attach bit; indicates that the router is a level 2 router and can reach
other areas
■
P—P bit; detects whether intermediate system is capable of area partition
repair
■
OL—Overload bit; determines whether intermediate system is congested
390 ■
Monitoring IS-IS
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide