Section 6: Programming Worksheets
[377] Communication Variables
(3-digit decimal)
Range: 000-255 attempts unless otherwise noted
Description on page 123
001 – Swinger Shutdown Attempts:
Alarms and Restore (000-014):
Default: 003
Tampers and Restore:
CP-01
Default: 002
Maintenance and Restore:
002 – Communication Delays:
Communication Zone Delay
Default: 000
CP-01
Default: 030
AC Failure Communication Delay
Default:030 minutes/Hours
TLM Trouble Delay
NA
Default: 010 checks
EN
Default:002 checks
Wireless Zone Low Bat. Transmission Delay
Default: 0000 days/hours
Delinquency Transmission Cycle Delay
Default: 030 days/hours
Communications Cancel Window
Default: 000 minutes
CP-01
Default: 005 minutes
003 – Periodic Test Transmission Cycle (Default: 030 hours/days):
Note:
For UL installations, the periodic test transmissions default is 07 days.
004 – Periodic Test Transmission Time of Day (Default: 9999):
011 – Maximum Dialing Attempts: (Default: 005):
012 – Delay Between PSTN Attempts: (Default: 003 seconds):
013 – Delay Between Force Attempts: (Default: 020 seconds):
014 – Post Dial Wait for Handshake: (Range: 001-255; Default: 040 Seconds; UL=45):
015 – IP/Cellular Wait for Ack: (Range: 001-255; Default: 060 seconds):
016 – IP/Cellular Fault Check Timer: (Range: 003-255; Default: 010):
[380]
Communicator Option 1
1 –
R
Communications Enabled
2 –
o
Restore on Bell Time-out
Description on page 125
3 –
o
Pulse Dialing
4 –
o
Pulse Dial after 5th Attempt
5 –
o
Parallel Communications
NA
6 –
o
Alternate Dial
EN
6 –
R
Alternate Dial
7 –
o
Reduced Dialing Attempts
- 209 -
