Section 4: System operation
[33] Bypass Recall
This function bypasses the same set of zones that were bypassed the last time the partition was armed. This function is equi-
valent to pressing [999] while in the [*][1] menu. An access code is required to use this feature if section [023] option 4 is
enabled.
[34] User Programming
This function is the equivalent of entering [*][5]. A master or supervisor access code is required to use this function. This key
only works while the system is disarmed.
[35] User Functions
This function puts the keypad in user programming mode and is the equivalent of entering [*][6]. An access code is required
to use this function. If section [023] option 8 is off, only the Master or Supervisor code can access the [*][6] menu.
[37] Time & Date Program
This function places the keypad in date/time programming mode. A valid access code is required.
[39] Trouble Display
This function puts the keypad in trouble display mode and is equivalent to pressing [*][2]. This function only works while the
system is disarmed. This function key requires a code if section [023] option 5 is enabled.
[40] Alarm Memory
This function puts the keypad in alarm memory display mode and is equivalent to pressing [*][3]. This function only works
while the system is disarmed. This function key requires a code if section [023] option 6 is enabled.
[61]-[68] Partition 1 to 8 Select
This function selects partition 1-8 when the assigned key is pressed. Pressing and holding the key for 2 seconds selects the
next partition.
4.6 Language selection
The keypad can be programmed to display messages and labels in different languages. Perform the following from the
Installer Programming menu:
1. Enter installer programming [*][8][installer code]
2. Enter section [000]>[000].
3. Select a language using the scroll buttons or by entering a hotkey:
Table 4-3 Languages
[01] – English
[15] – Greek
[02] – Spanish
[16] – Turkish
[03] – Portuguese
[18] – Croatian
[04] – French
[19] – Hungarian
[05] – Italian
[20] – Romanian
[06] – Dutch
[21] – Russian
[07] – Polish
[22] – Bulgarian
[08] – Czech
[23] – Latvian
[09] – Finish
[24] – Lithuanian
[10] – German
[25] – Ukrainian
[11] – Swedish
[26] – Slovakian
[12] – Norwegian
[27] – Serbian
[13] – Danish
[28] – Estonian
[14] – Hebrew
[29] – Slovenian
4. Press [#] to exit.
5. After changing the language, a label default needs to be performed. [000] [999].
- 57 -
