Section 5: Programming
3. Scroll to the zone label to be programmed or key in the zone number. (e.g., 001 for zone label 1).
4. Scroll to the desired character’s location using the[<] [>] keys.
5. Enter the number of the corresponding character group until the desired character is displayed (see the following table).
Example: Press the “2” key 3 times to enter the letter “
F.
”
Press the “2” key 4 times to enter the number “
2.
”
To delete a character, use the [<] [>] keys to move the cursor under the character, then press [0].
If any key other than [<] or [>] is pressed before [0], the cursor moves one space to the right and deletes that char-
acter.
6. Press [#] to save the changes and exit.
Press
To Select/Display
[*]
[SELECT]
[#]
[ESCAPE]
[0]
[SPACE]
[1]
[A], [B], [C], [1]
[2]
[D], [E], [F], [2]
[3]
[G], [H], [I], [3]
[4]
[J], [K], [L], [4]
[5]
[M], [N], [O], [5]
[6]
[P], [Q], [R], [6]
[7]
[S], [T], [U], [7]
[8]
[V], [W], [X], [8]
[9]
[Y], [Z], [9], [0]
Zone label options
To access zone label options such as using ASCII characters, changing letter case and clearing the display, press [*] while
in Zone Label programming. The Select Option menu is displayed. Use the [<] [>] keys to access the following options:
Option
Description
WORD ENTRY
Provides access to the Word Library, a collection of words commonly used when programming labels. See below for
details.
ASCII ENTRY
Used to access uncommon characters or as a primary method for programming labels. 255 character entries are
available. Use the [<] [>] keys to scroll through the characters or enter a 3-digit number from 000-255. Press [*] to
select a character. See "ASCII characters" on page 264 for available ASCII characters.
CHANGE CASE
This option toggles the letter between upper case (A, B, C) and lower case (a, b, c).
CLEAR TO END
This option clears the display from the cursor to the end of the display.
CLEAR DISPLAY
This option clears all characters.
SAVE
Saves the new label.
Word library
The Word Library is a database of words commonly used when programming labels. Individual words can be combined as
needed (e.g., Front + Door). Words that do not fit on the first line are automatically moved to the bottom line.
To program a custom label using the Word Library:
1. Enter Installer Programming: [*][8][Installer Code].
2. Press [*], scroll to Zone Labels and press [*] again.The first zone is displayed. Alternately, press [000][001].
3. Scroll to the zone label to be programmed or key in the zone number (e.g., 001 for zone label 1).
4. Press [*] to open the Select Option menu.
5. Press [*] again to select the Word Entry option.
- 76 -
