Section 5: Programming
[987] - Language Version
This section will display the current language version of the communicator.
[988] - DNS 1 IP
This section will display the IP address of DNS Server 1. This is useful when the unit is configured for DHCP and the IP
address assigned to the device by the DHCP Server is needed. This value is programmed in Section [007] or assigned by
DHCP.
[989] - DNS 2 IP
This section will display the IP address of DNS Server 2. This is useful when the unit is configured for DHCP and the IP
address assigned to the device by the DHCP Server is needed. This value is programmed in section [008] or assigned by
DHCP.
[990] - Boot Loader Version
This section will display the current boot loader version of the communicator.
[991] - Firmware Version
This section will display the current firmware version of the device. Update worksheets with new version after a flash update
is completed.
[992] - Ethernet IP Address
This section will display the IP address of the Ethernet connection. This value is programmed in section [001] or assigned by
DHCP.
[993] - Ethernet Gateway IP Address
This section will display the IP address of the Ethernet connection. This value is programmed in section [001] or assigned by
DHCP.
[994] - Cellular IP Address
This section will display the current dynamic IP address assigned by DHCP to the cellular connection.
Note:
Cellular uses DHCP (dynamic IP) only. The cellular IP address is always provided by the cellular network (i.e., not pro-
grammable).
[995] - SIM Number
This section will display the Subscriber Identity Module (SIM) number of the SIM card installed in the communicator. Format
is: Major Industry Identifier (2 digits); Mobile Country Code (2 or 3 digits); Mobile Network Code (2 - 3 digits); Unique Number
(10 - 12 digits); and Checksum (1 digit). Valid SIM numbers range is: 18 - 21 numbers. Thisnumber is printed on the SIM and
the outside of the communicator carton.
Note:
The checksum digit is omitted on 19-digit SIM card numbers.
[996] - Cellular Telephone Number
This section will display the cellular telephone number of the SIM. This telephone number is required by the Installer for DLS
and remote firmware (flash) update.
[997] - IMEI Number
This section will display the unique 15-digit International Mobile Equipment Identity (IMEI) of the radio. Format is: Reporting
Body Identifier (2 digits), Allocation Number (4 digits); Final Assembly Code (2 digits); Serial Number (6 digits); and a check
digit.
[998] - MAC Address
This section will display the unique12-digit, hexadecimal number assigned as the Media Access Control (MAC) address of
the device.
[860] Display Keypad Slot Number
The 2-digit slot number of the keypad being used is displayed in this read only section.
[861]-[876] Keypad Programming
Use section [861] to [876] to configure keypads 1 to 16. For information on keypad programming, refer to the installation
sheet supplied with the keypad.
EN
Note:
For EN50131 compliant installations [861][021] options 1 and 2 must be disabled.
- 147 -