manualshive.com logo in svg

Impediment RS-1600-X24, User Manual

The Impediment RS-1600-X24 is a state-of-the-art device designed for ultimate performance. Discover its full potential by accessing the comprehensive User Manual, available for free download at manualshive.com. This manual guarantees a seamless experience, providing detailed instructions and troubleshooting tips to optimize your use of this cutting-edge product.

Share
Download
background image

RAID Management

27

3.4.4 Controlling Partition Access

The X24 Subsystem’s InfoShield capability lets you specify which hosts can access each partition. This 

gives you complete control of array access based on your specific needs. 

Figure 3–1

 shows an example of how you can use InfoShield. 

Figure 3–1

InfoShield example

Before you set up InfoShield, you should know the World Wide Name (WWN) for each host that you want 
to set up. Your SAN administrator should know the WWNs for your network. You can display a list of the 

last 64 WWNs that the X24 Subsystem is aware of on the SAN, and you can give each WWN a nickname 
of your own. This makes working with the InfoShield feature faster and easier.

You set up InfoShield by either excluding or including hosts on a list for each partition LUN. The list can 

include or exclude up to 64 specific hosts or all hosts for each partition LUN.

For example, in 

Figure 3–1

, Array A has two partitions. Partition 1 has an include list that contains only 

Accounting, so only the Accounting server can access partition 1. Array B, partition 3 has an exclude list 

that contains only the Web server, so all hosts 

except

 the Web server can access the partition. Array C 

uses the default setting, Include All Hosts, which permits all hosts to access the array.

3.4.4.1

Viewing Known WWNs

You can view the global host list, which includes the last 64 host WWNs that the X24 Subsystem is aware 
of on your SAN. The X24 Subsystem will be aware of any host that was started since the X24 Subsystem 

was last restarted. Typically, hosts scan for devices during their start-up process. When this happens, the 
X24 Subsystem saves the WWN information for the host, but does not retain the information after you 

Array A, partition 1 
accessed by Accounting

Array A, partition 2 
accessed by HR

Array B, partition 1 
accessed by Engineering

Array B, partition 3 
accessed by all hosts, 
except Web server 

Array B, partition 2 
accessed by HR and 
Accounting

Array C (single-partition 
array) accessed by all 
hosts

Web server

Accounting

Engineering

HR

Summary of Contents for RS-1600-X24

































































































































































































































































Reviews:

No comments

Related manuals for RS-1600-X24

Deuba 101848 Assembly Instruction Manual preview
101848
Brand: Deuba Pages: 7
kincrome K7795 Operation Manual preview
K7795
Brand: kincrome Pages: 3
ManoMano 03POH1010-V2 Instructions Manual preview
03POH1010-V2
Brand: ManoMano Pages: 8
Seagate ES.2 - Barracuda Enterprise 750GB SATA/300 7200RPM 32MB Hard Drive Product Overview preview
ES.2 - Barracuda Enterprise 750GB SATA/300 7200RPM 32MB Hard Drive
Brand: Seagate Pages: 2
Western Digital SiliconEdge Blue Series Brochure & Specs preview
SiliconEdge Blue Series
Brand: Western Digital Pages: 2
Fast Mover FMT1203 Instruction Manual preview
FMT1203
Brand: Fast Mover Pages: 2
SANHO iUSBPORTHD User Manual preview
iUSBPORTHD
Brand: SANHO Pages: 24
HOGYME HG61M0643 User Manual preview
HG61M0643
Brand: HOGYME Pages: 31
G-Technology G-RAID mini 1TB Installation Manual preview
G-RAID mini 1TB
Brand: G-Technology Pages: 13
Yardmaster 1013 WGY Assembly Instructions Manual preview
1013 WGY
Brand: Yardmaster Pages: 24
Lakeshore LC104 Manual preview
LC104
Brand: Lakeshore Pages: 7
ABSCO SHEDS J30082SK Assembly Instructions Manual preview
J30082SK
Brand: ABSCO SHEDS Pages: 20
ABSCO SHEDS Regent 30142RK Manual preview
Regent 30142RK
Brand: ABSCO SHEDS Pages: 24
Promise Technology SmartStor NAS Product Manual preview
SmartStor NAS
Brand: Promise Technology Pages: 246
Supermicro SSG-2028R-DN2R20L User Manual preview
SSG-2028R-DN2R20L
Brand: Supermicro Pages: 82
Supermicro 6048R-E1CR60L User Manual preview
6048R-E1CR60L
Brand: Supermicro Pages: 82
Supermicro 2028R-E1CR24L User Manual preview
2028R-E1CR24L
Brand: Supermicro Pages: 82
Supermicro 6028R-E1CR12L User Manual preview
6028R-E1CR12L
Brand: Supermicro Pages: 140

Brands by name

Popular brands

Load more brands