manualshive.com logo in svg

Impediment RS-1600-X24, User Manual, Page: 209 / 256

Share
Download
Impediment RS-1600-X24 User Manual Download Page 209

Configuring X24

191

2

Select 

Shutdown/Restart 

and press

 Enter 

The system confirms that you want to shut down

3

.Select 

Yes

 and press 

Enter

.

The system confirms that it has shut down.

To restart the SM, press 

Enter

 to restart.

The system performs its self-test. When you see the Disk Array Administrator initial screen, the SM is 
ready. 

G.1.2 Shutting Down the Other SM Module

You should shut down the other SM module when you need to remove the other SM module. This shut 
down is the same as unlocking the handles on the SM module hardware to remove it. Using the shutdown 
from the Disk Array Administrator lets you see any messages related to the shut down. You cannot see 

the messages when you unlock the hardware handles.

You should shut down both SM modules when you need to power down the whole system for 
maintenance, repair, or a move. For more information, see 

G.1.3, ”Shutting Down Both SM Modules”, on 

page 192

.

We strongly recommend that you shut down the SM module gracefully and do not turn off the power. A 

normal shutdown ensures that the write-back cache is flushed to the disk.

Summary of Contents for RS-1600-X24

































































































































































































































































Reviews:

No comments