manualshive.com logo in svg

Impediment RS-1600-X24, User Manual, Page: 225 / 256

Share
Download
Impediment RS-1600-X24 User Manual Download Page 225

Configuring X24

207

2

Select 

Rescan 

and press

 Enter

.

G.11 Pausing I/O

Most drive enclosures allow you to remove and replace drives while FC disk channel activity continues. 

However, you may still want to pause I/O if you are replacing more than one disk drive. The Hot Swap 
Pause option suspends activity on all device channels used in the X24 Subsystem, thereby ensuring data 
integrity on the connected drives and arrays.

Caution

Pausing I/O halts active I/O to the host.

Note

If you are not sure that your enclosure supports hot swapping, use the Hot Swap Pause option before 
you remove or replace any drives in an array.

To pause I/O:

1

From the System Menu, select 

Utilities

 

Menu

 and press

 Enter

.

The Utilities Menu displays. 

2

Select 

Hot Swap Pause 

and press 

Enter 

The Bus Paused screen displays.

Summary of Contents for RS-1600-X24

































































































































































































































































Reviews:

No comments