Impediment RS-1600-X24 User Manual Download Page 127

Page: 127 / 256

Managing Arrays & Partitions

109

Select the drives you want to use for the array and press

Enter

You select a drive by highlighting it and pressing

Enter

. Each selected drive turns gray in the drive list.

After you press

Enter

for the number of drives you entered previously, the system automatically goes to

the next screen. To skip a drive, use the

↑

↓

key.

You may want to select drives from different disk channels (I/O modules), which keeps the array online

even if one channel becomes unavailable.

If the array is mirrored, RAID 3, RAID 4, RAID 5, or RAID 50

and

you have one or more drives left, the

Number of Spares screen displays.

If the Number of Spares screen displays, enter the number of spares you want to add and press

Enter

This creates dedicated spares that can only be used by this array. A dedicated spare drive will not be
available for any other use.

If you do not want a dedicated spare, enter

The Select Drives screen displays.

If the Select Drives screen displays, select the drive you want to use as a dedicated spare and press

Enter

Only available drives, that is, drives that are not members of an array and are not assigned as dedicated

or pool spares, display. You can delete a dedicated spare from the array at any time. For more
information, see

E.1.2, ”Deleting a Dedicated Spare”, on page 168

Summary of Contents for RS-1600-X24

































































































































































































































































Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands

Impediment RS-1600-X24, User Manual

Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands