Impediment RS-1600-X24 User Manual Download Page 229

Page: 229 / 256

Configuring X24

211

To upgrade the LAN Subsystem’s firmware:

Check the version of LAN firmware you have now by pressing

CTRL-E

until the configuration information

screen with that information displays.

Call technical support for information about downloading the firmware updates.

From the computer connected to the SM module, access the DOS window.

At the DOS prompt change to the directory where you downloaded

the.bfl file.

Enter:

ftp [SM module’s IP address]

At the User prompt enter:

flash

At the Password prompt enter:

flash

At the FTP prompt enter:

bin

At the FTP prompt enter:

put [.bfl file name] flash

If you are using Windows 95 or 98, you will see a timeout message (Connection closed by remote host),

but the ftp process is continuing. You can ignore the timeout message. Wait a few minutes and check the
firmware version.

If you are using another operating systems, you will see the downloading progress displayed on the

screen.

When you see the restarting message, wait 60 seconds.

Check the version of LAN firmware you have now to make sure the firmware update worked by pressing

CTRL-E

until the configuration information screen with that information displays.

Repeat steps

through

on the other SM module.

Summary of Contents for RS-1600-X24

































































































































































































































































Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands

Impediment RS-1600-X24, User Manual

Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands