Impediment RS-1600-X24 User Manual Download Page 233

Page: 233 / 256

LAN Configuration

215

Select the option you want and press

Enter

The screen displays related to the option you selected.

Enter the IP address, subnet mask, or gateway you want and press

Enter

The system confirms that you want to make the change.

Select

Yes

and press

Enter

The system makes the change.

H.2.2 Configuring the FTP Settings

You can set two FTP-related settings:

•

Login

: Login name for FTP access to the SM module. You can use FTP to download firmware

updates. You can enter up to 15 characters. The default is flash.

•

Password

: Password for FTP access to the SM module. You can enter up to 15 characters. The

default is flash.

Changes to either of these settings on either SM module are automatically updated on the other SM
module.

To set the FTP settings:

From the System Menu, select

Configuration

Menu

and press

Enter

The Configuration Menu displays.

Select

LAN Configuration

and press

Enter

The LAN Configuration screen displays.

Select

FTP Settings

and press

Enter

The FTP Settings screen displays.

Select the option you want and press

Enter

The screen displays related to the option you selected.

Enter or select the option you want and press

Enter

The system confirms that you want to make the change.

Select

Yes

and press

Enter

The system makes the change.

H.2.3 Configuring the Telnet Settings

You can set two Telnet-related settings:

•

Password

: Password for accessing the SM module using the Ethernet port and Telnet. You can

enter up to 32 characters. The default is null (press

Enter

•

Timeout

: Number of idle minutes before the Telnet session times out. The default is no timeout,

which is shown as 0 minutes in the Disk Array Administrator.

Summary of Contents for RS-1600-X24

































































































































































































































































Search results

Summary of Contents for RS-1600-X24

Reviews:

Impediment RS-1600-X24, User Manual, Page: 233 / 256

Search results

Summary of Contents for RS-1600-X24

Reviews: