Impediment RS-1600-X24 User Manual Download Page 60

Page: 60 / 256

RS-1600-X24 User Guide

To set SAM passwords:

From SAM, select

Manage X24 Subsystem > General Config > Passwords/Security

The

Passwords/Security

page displays.

In the

Password Configuration

panel, enter the passwords you want.

Click

Change

5.1.5 Configuring the Security Options

You can enable or disable the following LAN-related functions:

•

FTP Capability

: Controls access to the SMs using file transfer protocol (FTP), which permits you to

upgrade the SM’s LAN Subsystem software. The default is enabled.

•

Telnet Capability

: Controls access to the SMs using Telnet, which permits you to manage the SMs

using your LAN. The default is enabled.

•

HTTP

: Controls access to the SMs using hypertext transfer protocol (HTTP), which permits you to

manage the SMs using SAM. The default is enabled.

•

SNMP Capability

: Controls the availability of SNMP, which permits remote monitoring of the SM

using your LAN. The default is enabled.

•

Internet Debug

: Used for diagnosing problems during the technical support process. We

recommend that this remain disabled unless support personnel tell you to enable it. The default is
disabled. You must restart both SMs for the change to take effect. Select

Shutdown/Restart

from

the SAM menu.

•

In-Band Management

: Controls whether you can use the X24 Configuration Application

Programming Interface (CAPI) to access the SM. Disabled means the SM does not have a

management LUN assigned. Click the blue text to access the page where you can assign the
management LUN.

To change any of the security options:

From SAM, select

Manage X24 Subsystem > General Config > Passwords/Security

The

Passwords/Security

page displays.

In the

Security Configuration

panel, select the options you want.

Click

Change

Summary of Contents for RS-1600-X24

































































































































































































































































Search results

Summary of Contents for RS-1600-X24

Reviews:

Impediment RS-1600-X24, User Manual, Page: 60 / 256

Search results

Summary of Contents for RS-1600-X24

Reviews: