manualshive.com logo in svg

Impediment RS-1600-X24, User Manual, Page: 137 / 256

Share
Download
Impediment RS-1600-X24 User Manual Download Page 137

Managing Arrays & Partitions

119

4

Press 

Esc

 to return to the Array Menu.

C.2.1.2

Viewing Drive Status

You can view the status of the drives in an array, including the following information:

• Drive number: The drive’s sequential position in the X24 Subsystem’s drive list.

• Drive status: Whether the drive is up or down.

• Spare: SPR identifies the drive as a dedicated spare.

• Channel number: Back-end disk bus number.

• Channel: ID

• Size: Size of the drive in MB.

• Usage: If part of an array, this displays the array name and member number. If a spare, this displays 

the type of spare. If unused, this displays Available. If the drive was part of an array that no longer 
exists, this displays Leftover.

Note

If a drive has failed or malfunctioned, it may not be listed.

To view drive status:

1

From the System Menu, select 

Array Menu 

and press 

Enter

.

The Select Array screen displays with a list of existing arrays.

Summary of Contents for RS-1600-X24

































































































































































































































































Reviews:

No comments