Impediment RS-1600-X24 User Manual Download Page 182

Page: 182 / 256

RS-1600-X24 User Guide

164

D.5 Capturing the Event Log, Hardware,

and Configuration Information

You can capture and save the following information to a file on your hard drive:

• Entire event log

• All hardware information

• All configuration information

• All debug information that is turned on.

This is useful if you want to print all of this information or attach it to an e-mail message.

The steps below use HyperTerminal as the terminal emulator software. If you use a different terminal
emulator, your procedure may be different.

To capture the event log, hardware, and configuration information:

With HyperTerminal up and running as your RS-232 interface terminal, from the System Menu, select

Utilities Menu

and press

Enter

The Utilities Menu displays.

From the

Transfer

menu in HyperTerminal, select

Capture Text

The Capture Text window displays.

Enter the path and file name you want to use to store the log file contents.

Save the file with a.txt file extension.

Click

Start

Select

Dump Debug Info

and press

Enter

From the

Transfer

menu in HyperTerminal, select

Capture Text

, then select

Stop

To capture the same information for the other SM, repeat steps

through

from the computer connected

to the other SM.

D.6 Displaying Drive Errors and

Resetting Error Statistics

You can display drive errors for a specific drive. You know a drive has errors when you see the letter E
in the first column of the Display Drives screen.

Summary of Contents for RS-1600-X24

































































































































































































































































Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands

Impediment RS-1600-X24, User Manual

Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands