Impediment RS-1600-X24 User Manual Download Page 210

Page: 210 / 256

RS-1600-X24 User Guide

192

To shut down the other SM module:

From the System Menu, select

Shutdown Menu

and press

Enter

The Shutdown Menu displays.

Select

Shutdown Other

and press

Enter

The system confirms that you want to shut down.

Select

Yes

and press

Enter

The system confirms that it has shut down.

G.1.3 Shutting Down Both SM Modules

You can simultaneously and gracefully shut down

both

SM modules. Use this in preparation to power

down the whole system for maintenance, repair, or a move.

Caution

Shutting down both SMs will cause users to lose access to data and will interrupt the flow of data.

To shut down both SM modules:

From the System Menu, select

Shutdown Menu

and press

Enter

The Shutdown Menu displays.

Select

Shutdown Both

and press

Enter

The system confirms that you want to shut down.

Select

Yes

and press

Enter

Both SMs shut down.

To restart both SM modules, press

Enter

at the same time on both SM modules.

G.1.4 Other Controller Menu

In addition to the previous shutdown menu, "other controller menu" gives the ability to kill or unkill the

other SM module, as well as shut down the other or both SM modules.

Caution

If the

SM module

is the only one working of the redundant pair, then killing the other

SM module

will cause

users to lose access to data and will interrupt the flow of data.

G.2 Changing the Date and Time

You can change the date and time on either SM module. A change to this setting on either SM module is
automatically updated on the other SM module.

To set an SM module’s date:

From the System Menu, select

Configuration Menu

and press

Enter

The Configuration Menu displays.

Select

Set Date/Time

and press

Enter

The Set Date/Time screen displays.

Summary of Contents for RS-1600-X24

































































































































































































































































Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands

Impediment RS-1600-X24, User Manual

Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands