manualshive.com logo in svg

Impediment RS-1600-X24, User Manual, Page: 188 / 256

Share
Download
Impediment RS-1600-X24 User Manual Download Page 188

RS-1600-X24 User Guide

170

4

Select 

Enabled

 and press 

Enter

.

The Rescan Rate screen displays.

5

Enter the rescan rate in minutes.

This tells the SM how often it should look for an available drive by rescanning the bus. Rescanning the 
bus frequently can affect performance. If you have an EMP, the dynamic spare configuration will not 

rescan the bus. The EMP will detect the new drive and tell the SM to rescan; the rescan rate you set here 
will not affect the system. 

The system confirms the change.

6

Select 

Yes

 and press 

Enter

.

E.3 Managing the Spare Pool

The spare pool lets you have one or more disk drives available for the reconstruction of redundant arrays 
(mirrored [RAID 1 and RAID 10] and parity [RAID 3, RAID 4, RAID 5, and RAID 50]). Once you assign a 

drive to the spare pool, it is not available for use as an array member or as a dedicated spare. 

Pool spares are available to both SMs. If a drive in an array on either SM fails, the SM can use a pool 
spare to reconstruct the array. 

If a pool spare is too small (smaller than an individual member in an array), the SM cannot use it. 

Summary of Contents for RS-1600-X24

































































































































































































































































Reviews:

No comments